New Location address:
16257 S Tamiami Trail Ste. B
Fort Myers, FL 33908
New Location address:
16257 S Tamiami Trail Ste. B
Fort Myers, FL 33908
Yacht Management provided by Twin Screws Marine Service allows you as a Boat or Yacht owner the opportunity to relax and fully enjoy the time spent aboard your vessel. Relax knowing your yacht is operating as it should, is sparkling clean & well-maintained, is fully stocked for your next outing with family & friends – or fully prepared and delivered to the harbor nearest your favorite fishing or vacation spot!
Our expert mechanics will routinely check all your vessel’s systems, ensure that scheduled maintenance has been completed, will notify you of unscheduled maintenance issues and will see the repairs are professionally completed by factory certified mechanics and technicians. Your vessel is periodically checked upon ensuring it’s security and maximizing it’s dependability and resale value.
Yacht Management by Twin Screws Marine Service supplies more than just support and advice to owners and captains – we supply piece of mind and deliver a care free boating experience as you are safe in the knowledge that every last detail is being taken care of.
Professional Yacht Management Services requests:
They labor away in tight, stifling corners of the engine room or lazarette and, all too often, are overlooked until something goes wrong. If it’s been awhile since your marine generator was pressed into service, chances are it could use a bit of attention. This is especially true if you are planning a summer cruise when the genset will rack up a fair number of hours powering the air conditioning and other on-board systems you can’t seem to live without. The time to ferret out potential problems isn’t when you are anchored in that scenic cove.
Onan marine generators offers the following suggestions for boaters planning a cruise after a period of nautical inactivity. Before the trip, review your marine generator’s operating manual and perform (or contract out to a qualified marine generator service company) all necessary services (oil and filter changes, zinc replacements, belt inspection and replacement). It’s important to get this process started well ahead of the departure date, because if a problem is detected, you will need time to schedule service or repairs with a factory-authorized marine generator service center (call 239-330-3387) . These businesses can get pretty busy at the peak of the boating season.
The following inspection and troubleshooting routine of your marine generator is also suggested:
Some companies sell prepackaged spares kits which includes all items needed for routine service.
Once your cruise is under way, there are a few simple routines you should perform each day to ensure your marine generator remains in peak operating condition.
Spares and Repairs
In addition to items needed for routine maintenance and service, it’s a good idea to carry additional items with you on your trip needed to perform common repairs. This can save time if an authorized dealer is performing the repair, as the parts are readily at hand, and it could prove invaluable if you are in an area where parts are difficult or impossible to obtain.
Here is a spare parts list for traveling boaters: primary and secondary fuel filter elements; oil filters;
If you are operating a diesel generator a long distance from a servicing dealer, add the following:
Motor Boating contributor Vincent Daniello suggests a couple of additional items, based on his experiences as a professional captain. Carry an entire seawater pump and not just the impeller. “This is particularly important with belt-driven pumps, as it is often quicker to replace the pump than just the impeller,” he says. “And, invariably, once the pump has gotten hot, the bearings and seals will go soon.”
The one exception, Daniello says, is when an impeller wears on a fairly new pump because sand is running through it in a shallow marina. “This happens a lot in the Bahamas,” he says, “where questionable power in small settlements won’t carry the air conditioners in the heat of the day, and the shallow water is stirred up by other boats docking.”
Another item he suggests is a spare solenoid. Some generators won’t run if a shutdown solenoid fails. On others, the engine must be shut down manually in the event of a failure. The same holds true for oil pressure, exhaust temperature and coolant temperature switches, he says. However, nine times out of 10, it is the solenoid that fails.
article originally posted at: DiscoverBoating.com
We also provide factory-certified service, repairs and installations of many other Marine Generator brands such as Northern Lights, Onan, Cummins, Fischer Panda and Kohler. We offer on-site or dockside troubleshooting, service, repairs and new installations, or stop by our service center in Ft Myers for convenient drop-off and pick-up service.
Contact Twin Screws Marine Service for your Marine Generator Service:
Call 239-330-3387 today or use the form below to request more information or to book a marine generator service call.
Twin Screws Marine Service is a dealer of NEXT Generation Power. Sales and factory certified Installations can be performed at our service Center in Ft Myers, Fl., dockside or at your location – anywhere in Southwest Florida. Give us a call or stop in to learn more.
NEXT Generation UCM1 – 3.5 is one of the lightest, most compact and efficient gen-sets in its class.
Ignition protection certified- models can be in stalled in gasoline or diesel vessels
Have a generator that won’t fire up or won’t stay running? Are you looking for a new marine generator? We can help!
We offer Sales, Installations, Service, Repairs and Warranty Support for Westerbeke Gasoline & Diesel Generators and Engines as well as Next-Gen Generators.
Our technicians are certified in a variety of makes and models like Westerbeke, Northern Lights, Onan, Cummins, Fischer Panda, Kohler, Next Gen and more.
Contact us for onsite or in-shop generator troubleshooting, repair, upgrades or full replacement with certified installation.
From boats to yachts, Twin Screws Marine Service will come to your location to perform inspections, diagnostics, maintenance or repairs.
Servicing from Fort Myers to Marco Island and Boca Grande to Tampa Harbour, our technicians provide dockside, marina service bay or trailer-side service for your vessel. Utilizing state of the art computer assisted diagnostics and decades of experience, our factory certified technicians will accurately diagnose the underlying issue and will present you with options for an affordable and timely repair solution. We strive to get you back out on the water as inexpensively and as quickly as possible.
Twin Screws Marine Service is a proud member of ABYC. All our technicians are required to offer and install only those solutions that comply with ABYC and OEM standards of practice. You can be assured the service you receive will be the best your money can buy, backed by our 1 year OEM manufacturer’s guarantee on many parts.
We service all inboards, outboards, IO’s, marine generators, custom rigging, LED boat lighting interior and exterior, all boat systems, marine electronics, electrical, yacht management, boat sales, and much more! Some of the manufacturers we are certified in and service are Mercury, Merc Cruiser, Yamaha, Suzuki, Honda, Tohatsu, Volvo Penta, Yanmar, Cummins, CAT, Detroit Diesel, Onan, Northern Lights, Fischer Panda, Westerbeke, and more! Contact us today for all your boat repair and boat maintenance needs: 239-330-3387